Ankor Wax - 1 Litre

Indoors: 3–5 years

Covered outdoors: 2 years

Outdoors: 18 months

Recommended for medium to long-term rust prevention: bare metal, steel stock, vehicle underbodies and cavities, and equipment in storage or transit. Apply by brushing, low-pressure spray, or dipping, surface prep isn't critical, it goes over bare metal, light rust, dirt, or existing paint. To paint over it later, strip first with Tabor OK, Purolene, white spirit or kerosene.

Will it ruin my paint or patina?

No. It's designed to seal and preserve oxidised, chalky or patinated paint as-is, and dries clear. It can be buffed to a matte, semi-gloss or full gloss finish.

Can I paint over it later?

Not directly. Strip the coating first with kerosene, white spirit, or a degreaser.

Can I use it on a wet boat or after a wash?

Yes. It's formulated to displace surface moisture before the film sets, and performs well in damp, humid and saltspray conditions.

Flammable liquid (Class 3, Packing Group III). Keep away from heat, sparks and open flames.

May cause drowsiness or dizziness with prolonged exposure and avoid breathing spray mist, use in a ventilated area.

May be harmful if swallowed so keep out of reach of children.

Wear gloves and eye protection (goggles or face shield) when handling.

Store below 50°C, away from oxidisers, acids and bases, cap tightly closed.

Toxic to aquatic life, do not let it enter drains or waterways.

Full classification, first aid and handling detail: see Safety Data Sheet above.